Custom Decking & Deck Building in King County, WA

Deck pricing in King County depends primarily on five factors: total square footage, material selection, height and complexity of the structure, site access difficulty, and permitting requirements. A standard 300-square-foot ground-level composite deck typically ranges from $15,000 to $25,000, while an elevated multi-level deck with stairs and premium materials can reach $40,000 to $65,000 or more. Material costs vary significantly — pressure-treated framing is standard, but decking boards range from $3 per square foot for basic wood to $12-plus for premium PVC. Height adds cost because elevated decks require larger footings, more framing lumber, guard rails, and often stairs. Difficult access — steep lots, tight side yards, or homes requiring crane delivery — increases labor costs. King County and most King County jurisdictions require permits for decks over 30 inches high or attached to the home, adding $500 to $1,500 in permit fees and potentially extending timelines by 2-4 weeks for plan review.

Composite and PVC decking requires minimal maintenance in our King County climate: semi-annual cleaning with a composite deck cleaner and soft-bristle brush removes the organic film that accumulates from our damp conditions. We recommend cleaning in spring after pollen season and again in late fall after leaf drop. For natural wood decks, annual maintenance is essential — power wash at low pressure (under 1,500 PSI to avoid fiber damage), allow 48 hours of dry weather for the wood to dry completely, then apply a penetrating oil-based stain or sealer formulated for the Pacific Northwest. Check all visible fasteners and tighten or replace any that have backed out. Inspect the ledger board flashing annually and clear any debris that has accumulated between the deck and house wall. Keep the gap beneath your deck clear of leaves and debris to promote airflow and prevent moisture from being trapped against the framing.

Red Raven Exteriors provides a 5-year workmanship warranty covering structural integrity, fastener performance, and installation quality on every deck we build. This complements the manufacturer warranties on your chosen materials: Trex Transcend carries a 25-year fade and stain warranty plus a 25-year structural warranty; TimberTech Pro offers a 30-year structural and 30-year fade/stain warranty; AZEK PVC provides a limited lifetime structural warranty. For natural wood decks, our workmanship warranty covers structural framing and installation quality while the wood itself carries no manufacturer warranty — however, proper maintenance as outlined in our care guide will maximize its lifespan. All warranties are transferable to subsequent homeowners within the warranty period, adding value to your property.